Demand of reminder on this product
- 10.1″ TFT with industrial grade PCB design
- FLETAS® Metallized Projective Capacitive Touch
- PC / SBC ready (supports EDID for Plug & Play (auto display settings))
- A 1,000 cd/m2(nit) TFT panel is used (* actual brightness is 850cd/m2(nit))
- Touch sensitivity is adjustable via byte commands
- 5V single power supply
A 1,000 cd/m2 TFT panel is used
*Actual brightness is 850cd/m2
Variable projection radius. Tested up to a 5mm acrylic overlay without a?ecting touch response under factory conditions.
No interference from gloves or liquid. Maintains a smooth HMI.
Handles up to 10 concurrent touches at a time.
Glass surface is damage-resistant and tolerant to chemical cleaning solutions.
Touch Sensitivity Adjustment
By sending simple commands, touch sensitivity is easily adjusted.
|Display Size||216.96 mm x 135.60 mm (10.1 inch)|
|PCB Size||230.0 x 174.0 mm|
|Display Resolution||1280 x 800 pixels|
|Number of Colors||approx. 65K Colors|
|Operating Temp.||-20 to +70 ?|
|Brightness (Typ.)||425 cd/m2 at 50% Brightness
850 cd/m2 at 100% Brightness
|Operating Power||5V / 1.5A (Typical) with 100% Brightness|
|Interfaces||Serial interface (UART/ I2C)
USB (HID compliant)
HDMI (Video signal only)
|Touch Detection||Projection type capacitive.
Metallized Projective Capacitive Touch (MPCT) technology is used.
|Multiple Touch||10-point touch maximum (DRY condition|
You could also be interested in the following products :