Embedded Boards

Syscom-Prorep launch its production line for Industrial PC



Retour à la liste

SBC-B08

SBC with NXP i.MX 6SoloX Processor SBC-B08 is a new-generation all-in-one low-cost computer designed by SECO, equipped with a NXP i.MX 6SoloX applications processor able to run Linux. SBC-B08 is a revolutionary product in terms of connectivity, interactivity with the real world and cost: a new concept of single board computer ready for Internet of Things applications and for the Post-PC era.

Demand of reminder on this product

You are interested in this product ? Leave us your address and phone number to be contacted again by our services.

Name *

First name *

Company *

Postcode *

E-mail *

Tel *

* Please fill all the compulsory fields


Description

 
Processeur
NXP i.MX6SX SoloX Processor, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz
 
Max Cores
1 + 1
 
Mémoire

Soldered on-board DDR3L memory, 32-bit interface
SYS-B08-BASIC/D: 512MB
SYS-B08-FULL/D: 1GB

 
Graphique

Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator
OpenGL ES 2.0, OpenGL ES 1.1, OpenVG 1.1 supported

 
Interfaces vidéo

Single Channel 18-/24- bit LVDS connector + Touch Screen (I2C signals)
24-bit Parallel RGB Connector

 
Résolution vidéo

LVDS: up to 1366x768 @60Hz, 24bpp
RGB: up to 1920x1080p @60Hz, 24bpp

 
Stockage de masse

16MB NOR Quad-SPI Flash soldered onboard µSD Card slot
SYS-B08-FULL/D: 8GB eMMC soldered onboard

 
Networking

SYS-B08-BASIC/D:1x Fast Ethernet RJ-45 connector
SYS-B08-FULL/D: 2x Fast Ethernet RJ-45 connector + WiFi (802.11 b/g/n) +BT LE combo module + antenna onboard

 
USB
1 x USB 2.0 OTG port
3 x USB 2.0 Host ports on standard Type-A socket
1 x USB 2.0 Host port on internal pin header
 
Audio
I2S Audio interface on programmable pin header
S / PDIF interface (In and Out) on programmable pin header
 
Ports série

1 x CAN Port reconfigurable as GPIO
2x RS-232 (Tx/RX signals only) + 1x RS-485 serial ports on expansion pin header

 
Autres interfaces

2 x I2C dedicated connectors (one reserved for Touch Screen)
6 analog inputs for A/D Conversion
Programmable (*) expansion pin header connector, able to offer:
• CSI interface input (PAL and NTSC formats supported)
• Up to 20 GPIO
• SPI interface
• SPDIF Audio interface
• I2S Audio interface
• CAN interface (TTL level)
• 5 x PWM
• 3 x I2C
• 3 x serial ports (2x RS-232 +1xRS-485 interface)
Embedded Low Power RTC
(*) Please note that some of these interfaces are factory options, other configurations are made via SW using the pin multiplexing possibilities of the i.MX6SX processor.

Optional 9-Axis Motion Sensors (Accelerometer, Magnetometer and Digital Gyroscope)

 
Alimentation électrique

+12VDC nominal voltage
+3VDC cabled Coin Cell Battery

 
Système d'exploitation

Linux
Yocto

 
Température d'exploitation

0°C  ÷ +60 °C (commercial temp.)*
-40°C ÷ +85°C (industrial version)

*Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

 
Dimensions
89.5 x 87 mm (3.52” x 3.43”)

Related products

You could also be interested in the following products :

Actualités

Offered by Syscom-Prorep, parent company to 6TA, ArborTechnology's ASLAN IHM Industrial PC panels propose a large range of screens from 10.1 to 21.5 inches, and equipped with a Intel Core i5-6300U processor for implementations requiring...

Antenova, Syscom-Prorep's partner for years, has just released a document of the placement of antennas. A must read for any designers in communicating products!

MEMXPRO
18/05/2020

MEMXPRO 32GB DDR4 3200
Extended temperature range solutions for 5G implementations, improves communication in remote areas.

Digital View 4K UltraHD - Choose your LCD controller for your monitoring needs

Top
Changing Cookie Settings

Dear users, this website stores cookies on your computer. Their purpose is to improve your website experience while providing you with more personalized services.

If you would like more information about the cookies we use, please see our Privacy Policy. By accepting cookies, you consent to their use. You can also adjust their settings.

If you refuse cookies, your information will not be tracked when you visit this site. Only one cookie will be used in your browser to remember your preference not to be tracked.

  • Change the parameters
  • Accept all cookies and continue to the website