USB to LAN

Syscom-Prorep launch its production line for Industrial PC



Retour à la liste


Description

AX88179 is the world's first USB 3.0 to Gigabit Ethernet controller which integrates USB 3.0 PHY and 10/100/1000Mbps Gigabit Ethernet MAC/PHY in a single chip. The AX88179 is the latest addition to ASIX's USB-to-LAN product portfolio, providing a small form factor solution and plug-and-play usability, enabling embedded system designers to deliver Gigabit Ethernet connectivity while leveraging the growth and speed of USB 3.0 SuperSpeed technology. AX88179 can be used in any embedded system with a USB host microcontroller requiring a twisted pair physical network connection. Featuring a USB interface (compliant with USB specification V3.0, V2.0 and V1.1) to communicate with a USB Host Controller, the AX88179 also integrates on-chip Gigabit Ethernet MAC and PHY (IEEE802.3, IEEE802.3u and IEEE802.3ab compatible). Additionally, the AX88179 needs only a single 25MHz crystal to drive both the USB and Ethernet PHYs. The AX88179 offers a wide array of features including IPv4/IPv6 checksum offload engine, crossover detection and auto-correction, TCP large send offload and IEEE802.3az EEE (Energy Efficient Ethernet). The EEE defines a mechanism that allows the AX88179 to enter a low power idle state to reduce power and to achieve a more energy efficient Ethernet. It supports dynamic cable length detection and dynamic power adjustment Green Ethernet in Gigabit mode. The AX88179 also offers multiple power management Wake-on-LAN features, including Magic Packet, Microsoft Wakeup Frame and Link Status Change that allows systems to enter a low power state and wake on desired network traffic. The AX88179 is a high performance and highly integrated ASIC which enables a low cost, small form factor, and simple plug-and-play Gigabit Ethernet network connection capability for desktops, notebook PCs, ultrabooks, cradles/port replicators/docking stations, game consoles, digital-home appliances, and any embedded system using a standard USB port. Single chip USB 3.0 to 10/100/1000M Gigabit Ethernet controller with Energy Efficient Ethernet (EEE) base on digital signal processing (DSP) technology with low dissipation USB Device Controller Integrates on-chip USB 3.0 PHY and controller compliant to USB Spec 3.0, 2.0 and 1.1 Supports all USB 3.0 power saving modes (U0, U1, U2, and U3) Supports USB Super/High/Full Speed modes with Bus-power or Self-power device auto-detect capability High performance packet transfer rate over USB bus using proprietary burst transfer mechanism (US Patent Approval) Gigabit Ethernet Controller Supports IEEE 802.3az (Energy Efficient Ethernet) IEEE 802.3, 802.3u and 802.3ab compatible Integrates 10/100/1000Mbps Gigabit Ethernet MAC/PHY Supports dynamic cable length detection and dynamic power adjustment Green Ethernet (Gigabit mode only) Supports parallel detection and automatic polarity correction Supports crossover detection and auto- correction Supports IPv4/IPv6 packet Checksum Offload Engine (COE) to reduce CPU loading, including IPv4 IP/TCP/UDP/ICMP/IGMP & IPv6 TCP/UDP/ICMPv6 checksum check & generation Supports TCP Large Send Offload V1 Supports full duplex operation with IEEE 802.3x flow control and half duplex operation with back-pressure flow control Supports IEEE 802.1P Layer 2 Priority Encoding and Decoding Supports IEEE 802.1Q VLAN tagging and 2 VLAN ID filtering; received VLAN Tag (4 bytes) can be stripped off or preserved Supports Jumbo frame up to 4KB PHY loop-back diagnostic capability Support Wake-on-LAN Function Supports suspend mode and remote wakeup via link-change, Magic Packet, Microsoft Wakeup Frame and external wakeup pin Supports Bonjour wake-on-demand Advanced Power Management Features Supports power management offload (ARP & NS) Supports dynamic power management to reduce power dissipation during idle or light traffic Supports AutoDetach power saving Supports advanced link down power saving when Ethernet cable is unplugged Supports optional serial EEPROM (93c56/66) for storing USB Descriptors, Node-ID, etc. Supports embedded eFuse (64-byte) to store USB Device Descriptors, Node-ID, etc to save external EEPROM Supports automatic loading of USB Device Descriptors, Node-ID, etc. from embedded eFuse or external EEPROM after power-on initialization Single 25MHz clock input from either crystal or oscillator source Integrates on-chip power-on reset circuit Integrates pipelined RISC (System on a Chip, SoC) for handling protocol and control functions 68-pin QFN 8mm x 8mm RoHS/REACH compliant package Operating over 0°C to 70°C temperature rang

Related products

You could also be interested in the following products :

Actualités

Offered by Syscom-Prorep, parent company to 6TA, ArborTechnology's ASLAN IHM Industrial PC panels propose a large range of screens from 10.1 to 21.5 inches, and equipped with a Intel Core i5-6300U processor for implementations requiring...

Antenova, Syscom-Prorep's partner for years, has just released a document of the placement of antennas. A must read for any designers in communicating products!

MEMXPRO
18/05/2020

MEMXPRO 32GB DDR4 3200
Extended temperature range solutions for 5G implementations, improves communication in remote areas.

Digital View 4K UltraHD - Choose your LCD controller for your monitoring needs

Top
Changing Cookie Settings

Dear users, this website stores cookies on your computer. Their purpose is to improve your website experience while providing you with more personalized services.

If you would like more information about the cookies we use, please see our Privacy Policy. By accepting cookies, you consent to their use. You can also adjust their settings.

If you refuse cookies, your information will not be tracked when you visit this site. Only one cookie will be used in your browser to remember your preference not to be tracked.

  • Change the parameters
  • Accept all cookies and continue to the website