Retour à la liste

GS3241-INE3

3G HD-SDI Re-timing Adaptive Cable Equalizer

Demande de rappel sur ce produit

Vous êtes intéressé par ce produit ? Laissez-nous vos coordonnées pour être recontacté par nos services.

Nom *

Prénom *

Société *

Code postal *

E-mail *

Téléphone *

* Veuillez remplir tous les champs obligatoires


Description

The GS3241 is a low-power, multi-rate re-timing Cable Equalizer supporting rates up to 3G HD-SDI. It is designed to equalize and restore signals received over 200m coaxial cable at 3G, compensate for DC content of SMPTE pathological signals, and re-time the incoming data. The device supports ST 424 (3G SDI), ST 292-1 (HD-SDI), and ST 259 (SD-SDI) signals and is optimized for performance at 2.97Gb/s. In addition to standard SMPTE rates, the device also supports re-timing of DVB-ASI at 270Mb/s and MADI at 125Mb/s.

The two trace drivers have highly configurable pre-emphasis and swing controls to compensate for long trace and connector losses.

Features


  • 75Ω cable input interface with on-chip termination
  • SMPTE ST 424, ST 292-1 and ST 259 compliant input/output
  • Multi-standard operation from 1Mb/s to 2.97Gb/s
  • In addition to standard SMPTE rates, the device also supports re-timing of DVB-ASI at 270Mb/s, and MADI at 125Mb/s
  • 3D Input Signal Eye Monitor
  • PRBS generator and checker
  • Automatic cable equalization—typical equalized cable lengths of Belden 1694A cable:
    • 190m at 2.97Gb/s
    • 260m at 1.485Gb/s
    • 450m at 270Mb/s and 125Mb/s
  • Cable equalizer features:
    • Automatic power down on loss of signal
    • Programmable carrier detect with squelch threshold adjustment
    • Programmable launch swing compensation for non-compliant source
    • Manual and automatic cable equalizer bypass
  • Trace driver features:
    • Integrated 100Ω, differential output termination
    • E×tends output DC-coupling support with 1.2V to 2.5V output supply range
    • Trace driver data output pre-emphasis to compensate for up to 60” FR4 at 2.97Gb/s
    • Manual or automatic re-timer bypass
    • Manual or automatic mute or disable on LOS
  • CDR features:
    • Manual or automatic rate modes
    • Wide Loop bandwidth control
    • Re-timing at the following data rates: 125Mb/s, 270Mb/s, 1.485Gb/s, and 2.97Gb/s—this includes the f/1.001 rates
  • Additional Features:
    • Single 1.8V power supply for analog and digital core
    • GSPI serial control and monitoring interface
    • Four configurable GPIO pins for control or status monitoring
    • Wide operating temperature range: -40°C to +85°C
    • Small 6mm × 4mm 40-pin QFN
    • Pb-free/Halogen-free/RoHS and WEEE compliant package
    • Pin compatible with the GS12141, GS12142, and GS12241

Télécharger le(s) PDF(S)

Produits liés

Vous pourriez également être intéressé par les produits suivants :

Actualités

Antenova propose une nouvelle antenne IoT ultra-fine dans sa famille Reflector permettant l'intégration dans des boitiers en métal

JETWAY propose des processeurs ROCKCHIP sur différents formats de carte: Pico-ITX; Micro-ATX; SBC 3.5''; SBC2.5'' et SBC 1.8''

Quectel Wireless lance deux nouveaux modules BG95 et BG97 multi-mode Cat M1, Cat NB2 et eGPRS
Le BG97 supportant le Cat M1/Cat NB2 et GNSS offre une taille réduite de 14mm x 15mm, idéale pour des applications compactes

Top