SDI Interfaces

 As a pioneer in digital video, Semtech’s Gennum Products continue to lead the way in proven UHD-SDI/12G, 3G, HD and SD technologies. Semtech continues its leadership in SDI technology by being first to market with an array of advanced UHD-SDI solutions. In fact, there’s a good chance that any TV broadcast or professional video passed through several Semtech components.

Retour à la liste

GS3440-INE3

Long Reach, Multi-rate 3G Adaptive Cable Equalizer

Demande de rappel sur ce produit

Vous êtes intéressé par ce produit ? Laissez-nous vos coordonnées pour être recontacté par nos services.

Nom *

Prénom *

Société *

Code postal *

E-mail *

Téléphone *

* Veuillez remplir tous les champs obligatoires


Description

The GS3440 is a high-speed BiCMOS integrated circuit designed to equalize and restore signals received over 75ohm coaxial cable.

The device is designed to support SMPTE ST 424, SMPTE ST 292 and SMPTE ST 259, and is optimized for performance at 270Mb/s, 1.485Gb/s and 2.97Gb/s.

The GS3440 features DC restoration to compensate for the DC content of SMPTE pathological test patterns.

 The Carrier Detect output pin (CD) indicates whether a valid input signal has been detected. It can be connected directly to the SLEEP pin to enable automatic power-down upon loss of carrier. In the manual sleep mode, a voltage programmable threshold, which can be changed via the SQ_ADJ pin, forces CD high when the input signal amplitude falls below the threshold. This allows the GS3440 to distinguish between low-amplitude SDI signals and noise at the input of the device.

The equalizing and DC restore stages are disengaged when the BYPASS pin is HIGH. No equalization occurs in Bypass mode.

The GS3440 includes a gain selection pin (GAIN_SEL) which, when tied HIGH, compensates for 6dB flat attenuation.

The differential outputs can be DC-coupled to all Gennum cable drivers and reclockers and to industry-standard 1.2V, 2.5V and 3.3V CML logic using the VCC_O pin. In general, DC-coupling to any termination voltage between 1.2V and 3.3V is supported.

The GS3440 also includes programmable de-emphasis with three operating levels in order to support long PCB traces. The device is available in a 16-pin, 4mm x 4mm QFN package.

The GS3440 is Pb-free, and the encapsulation compound does not contain halogenated flame retardant.

This component and all homogeneous subcomponents are RoHS compliant.

Features


  • SMPTE ST 424, SMPTE ST 292 and SMPTE ST 259 compliant
  • Automatic cable equalization
  • Multi-standard operation up to 2.97GB/s
  • Performance optimized for 270Mb/s, 1.485Gb/s and 2.97Gb/s. Typical equalized length of Belden 1694A cable:
    • 200m at 2.97Gb/s
    • 250m at 1.485Gb/s
    • 500m at 270Mb/s
  • Supports DVB-ASI at 270Mb/s
  • Manual bypass (useful for low data rates with slow rise/fall times)
  • Programmable carrier detect with squelch threshold adjustment
  • Automatic power-down on loss of signal
    • Standby power <30mW (typical)
  • Differential outputs support DC-coupling to 1.2V, 2.5V and 3.3V CML logic
  • 0/6 dB gain boost selection pin
  • Selectable de-emphasis: 2dB, 4dB and 6dB
  • Standard EIA/JEDEC logic control and status signal levels
  • Wide operating temperature range of -40ºC to +85ºC
  • Small footprint QFN package (4mm x 4mm)
    • Footprint compatible with the GS2974, GS2984 and GS2994
  • Pb-free and RoHS compliant

Produits liés

Vous pourriez également être intéressé par les produits suivants :

Actualités

Jetway, l'un des principaux fabricants mondiaux de PC industriels (IPC), est heureux de lancer la série HBFMF833 (W), un serveur barebone sans ventilateur certifié IP69K avec connecteurs M12 pour les environnements extrêmes.

Quectel Wireless lance deux nouveaux modules BG95 et BG97 multi-mode Cat M1, Cat NB2 et eGPRS
Le BG97 supportant le Cat M1/Cat NB2 et GNSS offre une taille réduite de 14mm x 15mm, idéale pour des applications compactes

Jorjin Technologies propose un combo BLE 4.2 & Sigfox basé sur le chipset STM BlueNRG-1

Quectel propose le module EG25-G offrant une connectivité globale avec 30 bandes radio couvertes en LTE, 3G et 2G.
Basé sur le chipset Qualcomm MDM9x07 et suivant la release 11 LTE du 3GPP, le débit descendant atteint 150Mb/s et le débit montant...

Top